HELP!! NEED WHEEL OFFSET FOR OBS CHEVY FULLSIZE, PLEASE!!

I HAVE SEARCHED ALL OVER HERE, CALLED SOME DIFFERENT SHOPS AND EVEN CONTACTED SOME WHEEL COMPANIES. I HAVE A 1993 CHEVY FULLSIZE THAT WILL BE STOCKFLOORED TO THE ROCKER, HAS ART CONTROL ARMS AND A KP SIX-LINK. I AM BUYING NEW WHEELS AND I WANT THE OFFSET TO BE CORRECT SO THEY WILL TUCK WITH NO PROBLEMS. I AM GOING TO GET 22X8.5 INCH WHEELS FOR THE FRONT AND 22X10 INCH WHEELS FOR THE REAR, USING 265/35R22 TIRES. I WANT TO ORDER MY WHEELS SOON SO ANY HELP WOULD BE GREAT.

Edited: 3/18/2011 4:34:40 PM by Marcos_65

http://www.fullsizechevy.com/forum/general-discussion/street/297614-what-tucks-bagged-truck-obs-nbs-info-here.html

--------------------------------------------

Nickleahy23;2934123 said:

Ok well ive seen a few people suggest it but noone has made a thread about it all..This could be made into a sticky sometime. Only post up your truck style, wheels size, tire sizes, offset and backspacing. No questions in this thread just info. Mabye throw up a picture to show how they sit compared to the bedsides/fender. Once people start postin I can compile a list in this first post for reference.Ill start it off.

OBS Trucks

Boss 304's 22x9.5,+16 mm offset 5.810" backspacing Chrome 5 on 5. Tires are 265/35/22. Tuck with no problemsEagle Alloy 026 20x8.5" +14mm with 5.2" backspacing, 6x5.5 bolt pattern, 255/35/20 Tires. Tuck with EASEAmerican Racing Motto MT-100 20x8.5 4 3/4" backspacing 0mm offset 255/35/20 tire.Barely tucks, rolled front fenders.OEM 2007 Yukon/Sierra 20x8.5 6" backspace with 31mm offset 275/45 tire,6 lug comversion,tucks nice.Intro Pentia 20x8.5 5.5" BS 255/40/20Intro Pentia 20x10 6.25" BS 275/40/20 (Rear) Cruiser 357c 20x9 with +20mm offset on 255/35/20

NBS Trucks

22x8.5 Boyd Coddington Slayer with Nitto 420S 265/35R22 6 inches of b/s

Rear Only22x10 Boyd Coddington Slyer with Nitto 555 285/35r22 with 7.5 inches of b/s

1992 c1500 2wd, Boss 304's 22x9.5 Chrome 5 on 5 +16 mm offset 5.810" backspacing. Tires are 265/35/22. Tuck with no problems

--------------------------------------------

THANKS MARCOS FOR THE INFO BUT IN THAT WHOLE THREAD THERE WAS NO INFO ON MY PARTICULAR WHEEL SIZES, THERE HAS TO BE SOMEBODY ON HERE WITH A TRUCK LIKE MINE WITH SOME INSIGHT TO MY PROBLEM. I CANT MEASURE MY TRUCK BECAUSE IT IS BLOWN APART AND DOESN'T HAVE ANY FENDERS OR A BED ON IT, PLEASE SOMEBODY HELP A GUY OUT.

Hello, I had also some problem about my BMW car wheel. Than I changed it with the help of this site. You should also go here for your wheel problem.

thanks!!

Just takes a little math.

i run a +40 offset, i have boss 329's, they are 22x9 i believe. my truck is stockfloored to the rockers as well. i have about an inch clearance on the bed sides laid out with a stock rear diff. and the front fenders are no problem, i have stock control arms. one thing i would make sure is that the center caps will work. I think some wheel companies gain offset by shaving some off the back of the wheel but if they do this too much then the dust caps stick through the wheel, i wasn't able to run the boss center caps on mine because of that very problem so i run a bullet style center cap and it works just fine.