22s in the rear??? (how wide)

how wide of 22s can u run in the rear of a 2nd gen s10 thats body dropped??...w/o having to cut anything??

Originally posted by idragbodyS10



how wide of 22s can u run in the rear of a 2nd gen s10 thats body dropped??...w/o having to cut anything??

WITHOUT cutting anything? Magic... maybe ?i have no idea Scott. just giving you a hard time.mike

w/o shorting the axle....cutting is ok..

10" w' 6" back spacing

^^^ what he said, but if you can find 9.5 you'll be a little better off

ive been wondering the same thing, so 10" with 6" backspacing requires no shortening the axle or narrowing the frame and still tucks?

yea the 10's w/6 back is what i had on one of my old dimes fit no problem' and the truck was body dropped still fit its close to the frame so the wheels were not panhard bar friendly

i just took a hammer and beat it till it went in , oh wait we are talking about rims right

Originally posted by S10All422S



^^^ what he said, but if you can find 9.5 you'll be a little better off

why u suggest 9.5 over 10?? j/w

22x9.5 is pretty common and itll give you 1/2" more room for bedside/frame clearance for corners, side/side and whatnot