helpful tips on rear end setup for 93 honda civic(tubing)

ok i have been thinkin on starting my 93 coupe to lay frame on 18'z.im just tryin to see if i can get some helpful tips on tubing size and sheet metal size,and maybe some pics of a few civics that have a tubing setup,just a basic setup.tryin to still keep a back seat,and use air cylinders.

here is a link to my old 94 civic that was set up for twentys in the rear, hope this helps.If the pics dont work just let me know

http://www.mautofied.com/default.asp?NavX=M2&Results=Detail&PKID=100018488

thankx for the up's.nice coupe.here another question where did you re locate your gas tank,or gas line to sdd

i think there is a thread called"whos civic is this " there is about 380 people posted on that 1 ,if i remember correctly it has a civic tubed for 20's or its layin body on 20's,lemme see if i can find it

here is the thread,i think i remember seeing some help hints in the thread,its like 43 pages long ,but hopes this helps out click here

in the process of putting the axle in the back i had to cut a hole in the floor, so at that time i just bent the rear floor up and raised the tank and moved the filler neck in side the trunk .hope that answers your question.

thats what i was thinin of doin movin the line in the trunk behind the tail lights or somthin

I din't move the tank but my filler is cut down and just coming up in the trunk floor. Yea and check out that thread. There is some good info in there.

man that thread has alot of good info,not sure about the hole little spindle thing thou.i see if it will lay without cuttin it up.

so let me get this straight,my spindels are cast or just steel.i welded a plate on mine on the out side just to reinforce them cuz i grinded the insides alittle,i have a tig welder from lincoln.it seemed to work fine and holded up pettie good.i want to cutt the spindle but not sure on it.it seemed to weld real good.