S-10 wiring to painless wiring.

my question is.... does the painless wiring kit replace EVERY wire in the truck all the way to the light sockets, ignition, everything in the column? IM going with carbuerated 350 and wanted to take every wire out and was hopeing painless wiring kit replaces them all.

The painless kit just plugs into your steering column.it replaces every other wire in the truck.

so what your telling me is i can take everything out except whats in the column and i will be wired from the headlights to the tail lights, to everything on the interior?

bump

get a camaro column/headlight switch make it a TON easier.

or be a pimp like me an run toggle switches for everthing...im gonna have to get a camaro column

I have been told by several people including Painless that they do make a kit that plugs into the stock column. But when it came down to it they did not and I ended up getting a universal 18 circuit non gm harness. I just had to figure out what wires ont he column were what and other than that it was very easy. I used a test light and some diagrams to determine what wire on the column was what. On your question about the wiring going to your lights. Every wire is included. So basically you run the wires to their location and hook it up. It's only power wires so you will have to ground everything. If you have any specific questions or need any help hit me up. I just did mine recently and I can help you out.

This is when I first started it. You can see where I mounted my fuse box.

Edited: 4/1/2006 5:19:45 AM by 98sdrop

hey i have a? tho does this wiring kit include the operation or will it wire up to the heater controls, blower motor and to the blower motor resistor

thanks man i appreciate the help