hybrid suspension progress what you think

Edited: 4/16/2006 11:36:24 AM by 200bodydroppedrangr

heres some pics at time of pic bottom was not moved up or welded and it will be 2 boxes for all wheels.there 1/4in thicker cylinders at the bag to get more lift at the wheel. and also made a connector to the cylinder to bag. what do you guys think. its 3/16 box.thxs

I love when u guys go all nutty with this shit..... definatly love seein the end result... good luck with it keep up the work

its basicly a regular hydro with airbags pushing a cylender inthe trunk full of fluid and forcing the fluid to the cylenders at the wheels. 2 cylenders per wheel, one is extended and other is pushed in with the line full of oil. if you force onein the other gos out. you fill the airbag to force the cylender in trunk closed and that in ture forces the cylender at the wheel up.relase air bag presure to make the cylender in the trunk extended again (laying out the car)

i personally like the setup i know everyone is hating on you because it is alot of extra work. keep on posting pics

if you dont get it click here for a diagram. click the arrows. "

Hell yea, this stuff is always interesting.. Keep us updated!

how do you get a full amount of fluid into the lines

^ good idea, do you have to somehow bleed the lines?

i was thinking some type of zerk that you could push the fluid in with pressure so it would be 100 percent full and get full transfer and not run out of fluid b4 full cyl throw.

you should put an accumulator on the hydraulic side so the hydros have a purpose