airlift valves

Edited: 4/23/2006 6:48:25 AM by ashvdbx

got them on the front of my xb parkers in the rear. not one problem with either . smc suck. they always stick i have had them in the past and a couple of friends of mine have them and hate the smc's they always stick get a valve that says it will work in liquid as well cause even with a trap you will always get moisture and the smc's cant take the moisture thats why they always stick my first choice is parker always

if you wanna spend some $$$ get parkers, if you want a comparable valve for alot less, get gc 250s. www.gravity-werx.com

AirLift Valves chrome 3/8s were the best Valves i ever had. The were the only ones i NEVER had a problem with and the only ones i ever installed for others that never came back with a problem

Had a lot problems with SMC's sticking

But, AIR LIFT BAGS SUCK! fucking junk

Edited: 4/23/2006 8:56:02 PM by iLLblazer

Edited: 4/23/2006 8:55:19 PM by iLLblazer

Originally posted by shvd64cdy



ANYTHING FROM AIRLIFT IS SHIT, AND THEIR WARRANTY SUCKS AS WELL. I HAD 2 SETS OF AL BAGS BLOW THE RINGS OFF THE BAGS AT LESS THAN 200 PSI, THEN THEY WOULDN'T EVEN WARRANTY 'EM. KNOWN MORE THAN A FEW PEOPLE WHO HAVE RUN INTO THIS AS WELL.......SPEND THE EXTRA COUPLE OF BUCKS AND GO WITH A BETTER VALVE.

Sam u were talking to the wrong person at airlift. I have had my share of issues with there bags as well, and have always had warranties handled quickly and without issue. Especially with the bags going out on the rings, that was an issue with there 'bad batch' that should have been warrantied no questions asked. Talk to Corey if u ever have an issue again. He has always handled warranty issues for me and customers with no hassle at all. I agree that there products not always top notch, but from my experience there warranty has always been good.

appreciatte it guys got them ont he way already just didnt want to have problems lik ei did with those smc's

Originally posted by iLLblazer



Edited: 4/23/2006 8:56:02 PM by iLLblazer

Edited: 4/23/2006 8:55:19 PM by iLLblazer

Originally posted by shvd64cdy



ANYTHING FROM AIRLIFT IS SHIT, AND THEIR WARRANTY SUCKS AS WELL. I HAD 2 SETS OF AL BAGS BLOW THE RINGS OFF THE BAGS AT LESS THAN 200 PSI, THEN THEY WOULDN'T EVEN WARRANTY 'EM. KNOWN MORE THAN A FEW PEOPLE WHO HAVE RUN INTO THIS AS WELL.......SPEND THE EXTRA COUPLE OF BUCKS AND GO WITH A BETTER VALVE.

Sam u were talking to the wrong person at airlift. I have had my share of issues with there bags as well, and have always had warranties handled quickly and without issue. Especially with the bags going out on the rings, that was an issue with there 'bad batch' that should have been warrantied no questions asked. Talk to Corey if u ever have an issue again. He has always handled warranty issues for me and customers with no hassle at all. I agree that there products not always top notch, but from my experience there warranty has always been good.

couldn't tell you who it was on the warranty issue at air lift bro. it was awhile back, around SEMA '04. I blew the ring off one bag, then the other went out the day before SEMA. I bought them through FBI and the warranty issue should have rested with Air Lift, even given the situation, they were like "nope, can't do anything about it, you must have been running a high amount of psi through em which would void the warranty".........yeah, cause this is my 1st day and you know i like to try and make a 5,000 lbs piece of steel hop. WTF was that? So after getting bs'd, with less than 24 hours till SEMA, Nick over at Slam Specialties came through with a complete set of bags for it and took care of me really, really well (and still does). Plus, after running the Slam bags, I'll never run a different bag. Those bags ride fantastic even without shocks!!! anyways, i appreciate the input on 'em, but after putting up with their crap, and shit product, I have turned my head to air lift and their products, and it's worked out for the better, with a much better product and fantastic service through slam specialties. thanks for the input though bro, i appreciate you trying to help.