Just wanted some opinions on a 4 link. I definitly want rod ends and pretty sure its going to be standard triangulated.
I was looking at either the Fbi one or one from Suicide doors. The only real noticeable difference I see is the FBI uses 1" DOM and SD uses 1.5" DOM the price is close to 100 bucks difference. Im thinking the FBI one should be sufficient for the Hardbody considering its light and I have NO plans of creating Major Horsepower or Heavy Loads. Anyhow I just wanted to hear everyones comments Good or Bad.
i agree with layin low. you never know what your future plans might be. thats why i went ahead and bout the sd triangulated four link. i might plan on putting a bigger engine or something in my truck.
1" dom is fine, suicide doors also makes them in 1" too and it may be cheaper. If it was me i would buy a length of tubing and some end links and then a tap and make my own there not hard to make
I was thinking about making one but with the price of metal now and having to make all the mounting tabs to look halfway decent.Buy the rest of the rod ends and bolts it would be a whole lot easier to spend the couple extra bucks and just install it. BTW I have no intentions of going with a bigger motor for this thing as it is my daily driver. I have a couple other rides to satisfy my horsepower needs. Thanks for the comments tho.
yea but for the price of the 4 link you could get all the tubing needed, a notcher from harbor freight and a tap from ebay and rock threaded ends on both ends but they have to be different threads so you would probably need 2 taps but all of that isnt hard to do.
we sell a std triangulated 4 link 1" DOM bars, with poly bushing rod ends. they hold up alot longer and are quieter and absorb some of the shock your suspension receives from the road. www.gravity-werx.com