just comparing, how is the front of your f-150 bagged?

i have 4" lower control arms and wtih a 2600lb bag, had to do a lot of hacking of the lca, and now im ready to redo the front better. how are urs done guys? pics are cool too!

i at one time had 2600lb bags with DJM arms ... its a REAL tight fit.
btw, truck looks sik

Edited: 5/28/2006 6:42:16 PM by lascrew

I have DJM uppers & lowers with Conitec bags; the Doetsch Tech shocks have since been replaced with Rancho 9000's I don't lay frame and that is basically because I wanted to keep my sway bar. It will be going back in the shop in about a month to notch the bed, section the tank, new front fenders and relocate shit...but I will still be keeping my sway bar.

Nice ride, BTW. The front is sick!

when i was first bagged i had spindle flip and slam bags....

now i have djm upper and lower a arms, drop spindles and slam HE' 7s... with raised upper a arm mount i had to re do the djm's to help adjust the balljoint angle damn those big roller's

I just bought my F150 week before last, going to be laying it out soon..

Where are you guys buying the control arms from?

I have the back figured out but on the front, could I get away without spindles.. and just go with the control arms? if i HAVE to, I will get some spindles.. but I figured it might be easier to just do control arms.

well, when i first bagged my truck they didnt have drop spindles. and im wonderin if drop spindles and oem lowers will lay if i cut the coil tower and fab a plate commin off of the frame. did anyone do this?