F150 Billet Grill - Please Help!!!

Hey Guys.

Small Request.

Recently I puchased a late 90's C class mercedes benz... after speaking to John From Vertically Challenged who owns a bagged one himself... Told me that an F150 billet grill will fit the little merc without too much modification.

All I need is for some one to meausre there grill from top to bottom and side to side. as neither of us know what year F150 grill he used. so if you have any F150 either 97-98 or 99-03 or 04-current... Could you please just whip out a tape measure and let me know the size so i can compare it to my merc...

I Am asking this from all the way over in Australia. I would just go measure a F150 grill myself but the fact is we don't get them here. I have seen like 2 in my whole lifetime...

I am ordering a billet grill over the internet from america as again.... we don't get them here...


John's merc...


Look at my poor merc

It looks like it would have to be 97-98 cause the later ones are much bigger but it wouldnt be hard to cut any of them down as long as it was bigger than the hole.

Also, merc=mercury so might wanna watch your wording when you say that.

I think my lincoln front end is closer to that size I measured it. my front end is 8 3/4 tall and about 35 ins wide.

I worked it out after several e-mails etc. 97-98 F150... ordered it . yes it has to be cut. thanks guys...

We dont get Mercury's here so Merc = Mercedes here... LOL

you should put a mercury hood onrnimant on it