i dont know?

YOU

MUST

POST

THE

WIDTH

Offset by itself doesnt mean anything.

I can convert offset to backspace for you once you post the width. Or you can. follow this formula.

((wheel width in inches + 1)/2) + (offset in mm/25.4) = backspace.

using that formula you can also see that a +35mm offset 7 inch wide wheel has a WAAYYY different backspace than a +35mm offset 9 inch wide wheel.

Have to state width. Have to.

sorry thought i did there 8.5" with +35 offset thanks

that give u just over 6" of backspacing according to Russ' formula, thats plenty of spacing for those trucks, especially bagged ones. If it was just lowered u might have a few issues with it rubbing the fender when turned, but u should be fine

thanks