threads
Page 2 of 2
Chevy/GMC Trucks \  Another 20 inch rim question..

Another 20 inch rim question..

Chevy/GMC Trucks Make Specific
views 561
replies 16
following 11
 
c mau   +1y
so ouit of the 5X w/e whats the s-10?? like i know u said 4.75 or w/e but thats not on ANY websites..
c mau   +1y
Bumpin that question..

the lug pattern is..
5X WHAT?!!?!
97juicedGMC   +1y
the 5x120 5x4.74 same shit
97juicedGMC   +1y
the 5x120 5x4.75 same shit
mkhutch   +1y
I have some KMC SS wheels that are brand new that will fit. +10 offset, (2) 18x8.5 for the front and (2) 20x8.5 for the rear. Universal 5 lug pattern
minipu95   +1y
bro hate to break it to u but if ur running a 10" wide rim in the back its going to rub plus ull prolly have to shorten ur axle so it will even fit. usually go with an 8.5" wheel in front with 35 series tire can do 45 but 35's are more common and 9" is as wide as i would go on the back unless you dont need a bed floor and dont care about haven to shorten ur axle.and as for offset usually try to go anywhere between +10and+20dont go any higher than that. the bolt pattern for s-10 is 5x4.75 5 lug wheel also.
IMLOWER   +1y
20 x 8.5 with a 5.5 " backspacing for the front and a 20x10 with a 6" back spacing for the rear tire for the front 245/35/20 the rear will either need to be a 285/30/20 or a 285/35/20 a 20 x10 with 6 " backspaceing wont rub