another 2 link ?

having problems with 2 link laying rear of truck out. axle shifts when i starting dumping the rear.just need a quick fix soon.

Edited: 9/8/2006 8:43:18 PM by bdroppeddak

Edited: 9/8/2006 8:42:49 PM by bdroppeddak

sounds like ur panhard bar isnt right

which way does it shift? front to back or side to side?

Originally posted by bdroppeddak



Edited: 9/8/2006 8:43:18 PM by bdroppeddak

Edited: 9/8/2006 8:42:49 PM by bdroppeddak







LOL, now thats just funny. But chris isnt lying, he speaks the truth!

or you could buy the sweet wishbone setup i have in the classifieds, some bolts and some tabs and you have a sweet setup.

which way does it shift? front to back or side to side?

shifts front to back.

you can't really fix that because it IS a two link. it does it because the axle swings on an arch(sp). the only way you can make it shift less is with longer bars.

Originally posted by merrell



shifts front to back.

make the links longer if you can. Raise the forward mounting points if you can. If you want to be super duper half assed, just stick some 3 inch blocks between the bar and the axle, but you will also have to move your bag mounts to compensate.

if you are using the stock leaf perches, they are usually too low and the bars end up too short which gives you oodles of fore aft shift. If this is the case, congratulations, you just learned why you should always do it right the first time.

i dont know y everybody talks shit about 2-links,if they are shit y almost every truck has them and all the shops do them on all the trucks they do