beyond static
+1y
Originally posted by lowrthnu92
Originally posted by eks10BDRG-N
raise it by the bolts on the front of the tank that mount to the frame. raise those a inch or so. the rear bracket you can notch the crossmember so it will fit snug to the tank.(be sure to smooth out those ruff edges). jack up the tank and shorten the strap to lenght and re-drill the hole out again. this should raise entire tank and have plastic cover just below frame
thats we he did to his and thats we did to mine , at first just notching the rear crosmember and shorting the strap was enough but then i drug enough to need the front raised as well , all to gether my tank is raised about 2 - 2 1/2 inches( if i drag to my tank agin ill be layin body without a body drop ) , if you do raise it and if you raise to the point where you have to notch the the pinch weld on your cab your gonna need to notch the lil crosmember on your bed floor for the fuel lines
I did mine the same way. Raised the front almost an inch, and raised the back almost 2". I drag the hell out of my truck, and the tank doesn't drag