quick s10 help, inner fender removal, im in the middle of it.

I am taking out my inner fenders on my 01 2.2L S10.. wondering what everyone does with the coolant resevore on the passenger side... I was thinking about just removing it completly since my radiator is full of coolant and the container is empty..

Quick help would be appreciated guys..

Thanks alot.

I simply removed mine but I have seen some people just getting alot smaller containers and bolt them to the radiator support.

i removed mine completely and put a plug in the hose

Cool, thanks.. I'm gonna just pull it off and see how it runs.


ANother thing, Ive got the inner fenders out.. this is my first time doing this.. I have 18x9 wheels.. I'm guessing I'm going to have to cut some of the fender supports as well..

I was looking, I are the fenders spot welded to that support? or do I need to take the entire assembly off?

you can use one of those aluminum cylinder overflows. theyre all over ebay. jegs and summit both have them also

Originally posted by Brill



Cool, thanks.. I'm gonna just pull it off and see how it runs.

ANother thing, Ive got the inner fenders out.. this is my first time doing this.. I have 18x9 wheels.. I'm guessing I'm going to have to cut some of the fender supports as well..

I was looking, I are the fenders spot welded to that support? or do I need to take the entire assembly off?



I am kind of confused as to what your asking. The inner fenders are only held on by bolts. Take off all the bolts and thats it. As far as the wheels you'll probably need to do some cutting to the inside of the fenders. Mine need it and they are 18x8's I believe but I guess it depends on the offset. Just simply remove the inner fenders and lay it out or jack up the tire if its not bagged yet and see what it hits.