What size would be best on the front of a mazda b2200 with a v8? Should I go with Re6 or Re7's? Would the 1" lift between the 2 models make that much of a difference between running 18's or 20's on the front?It will be sfbd'ed eventually as well.
if u want to go with slams the Re7's is what i would suggest. i dont know how the slams are now but in a year i went through 8 slam bags. 5 front 3 rear.
Keep in mind you will probably have to notch the side of the framerail to have enough clearance to stuff an RE7 in the front of a mazda.
I would just run re6s.
if it were me i would put contitech 2500's (4-ply) up front. i love mine. absolutley no problems with them crackin, splitting, bubbling, etc. they have been on my truck for 2 years now with no problems and the truck is driven daily
it jsut seems that everybody on here has suggested Slams at one time or another, then everyone responding here has a lot of different opinions. I really just plan on going up and down, don't need to be breaking my neck with speed or anything like that.
Re6's are your best bet. Thats what i bought for the front of my hardbody when i had it. Re7's hit the spindle or I would have had to notch in my frame.
I channelled out my frame to put RE7s in front. It gets more lift, with less pressure. It should ride better up high where I need ti to turn, than an RE6 would have. It takes 90 PSI to get 10" lift. Before at 120 PSI I got about 8" of lift.