Can't lay out on 20's

Edited: 2/12/2007 1:23:51 PM by sideshizzle

I put 20s on my Tacoma this weekend. We cut the fenderwells and it sits lower than before but it doesn't lay and the bag is completely collapsed. Does anyone make spindles for this thing? I still need about 2 more inches before I lay in the front.

Bio Kustoms is starting to make spindles. Check out the thread about it, they look really badass. Very well built.

cando specialties does www.candospecialties.com

I saw Bio's thread but I'm looking for immediate gratification. I was hoping someone had already fixed the situation.


Cando's arms are built for 18s.

o are they my bad i didnt know

ummmmmmmmmmmmmmmm, if the bag is completely collapsed, then shouldn't you just move the upper bag mount up?

have you flipped the balljoints?

also, as mike stated, you may need to move the upper mount. im sure bobby from sadistic could tell you exactly what needs to be done, but im going off of what ive seen other ppl do.

mine lays 20s with 245 35 20 tires flipped ball joints and the djm uppers the cross member hits the ground

My balljoints are flipped but I'm on stock arms.

Originally posted by msturg



ummmmmmmmmmmmmmmm, if the bag is completely collapsed, then shouldn't you just move the upper bag mount up?

Yeah thats where i'd start!

haha

Does it lay out with no bag?