88-98 fullsize conrtol arms

can i lay out in the front on 22s with the stock control arms. thanks

i do not think so.the factory ball joint location will not allow that much movment and were the lower control arm is mounted to the frame when you lay out the lower control arm is so big that it hits the frame and you cannot go any more without modifing the frame for clearance akso have to modify the frame for tie rod movment

Edited: 3/10/2007 10:50:29 PM by lo75lux

yes,depending on tire size. if ur runnin a 265/35,just notch the frame and replate it where the LCA hits,and get moog balljoints. im not sure about other tires sizes tho. and yes,notch for tie rods and replate that also,i think u have to notch for tie rods with nething over an 18 with a 55 series tire

I sectioned the hump out of my lower arms, and reangled the upper balljoints about 10 degrees.

It is possible but not recomended. The angle on the ball joints in a stock arm is pretty severe when trying for a 22. It is a good idea to run control arms made to lay on big wheels.fixture built

how much does a set run??

699.99 for SSM members (750 more for non members) & yes they are in stock ready to ship.

Will these arms work on a 1ton Duallie. Its a 2000 model, but its the same body style as the 88-98 1500.

Edited: 3/30/2007 7:34:31 PM by Kruznlow69

Edited: 3/30/2007 7:33:44 PM by Kruznlow69

yes you can.. get moog uppers K6292's i lay and get 12 full inches of lift, slam re-7's 2 3/4" upper cups, uppers are not re-angled. humps cut in my lowers and uppers are trimmed to clear the upper mounts at full drop and the spindle at full lift..

follow my thread..http://www.fullsizechevy.com/forums/showthread.php?t=258545

jeremy, those arms looks awesome!