Uni-Balls...for Control Arms whos got'em?

Alright just curious if anyone knows where to buy just the uni-balls and the sleeve they mount in, to use on control arms. any helps great later

we got em.

we can sell you them with a custom shaft that will bolt right into your spindle, or you can drill your spindle out and use a grade 8 bolt....up to you.

www.barelylegalfabrication.com

Yea im not tryin to drill a spindle out lol, if i dont have too. What do you thinks better? the shaft or a grade 8?

ive got BYC arms on my blazer and ive been kinda thinkin about reinforceing them and runing uniballs in them.

Eh, i personally wouldnt fuck with the modifying the BYC arms.....that sounds like it could go bad possibly.....

i sent you a reply to your PM, call me tommorrow at the shop and ill take care of all the stuff you need.....ask for taylor.

Taylor

You would typically drill out the spindle for the bolt and crank it in.

taylor, a buddy of mine from NZ should be emailing you and i got your email for the mag

Originally posted by slamdblazer



Yea im not tryin to drill a spindle out lol, if i dont have too. What do you thinks better? the shaft or a grade 8?

well, if your not trying to drill your spindle......then the machined shaft to fit the taper of your spindle is probably your best bet. We make them from chromoly high tensle steel, its 28-34 rockwell, the material we use is just as strong as a grade 8 bolt, tensile stregnth is 95,000 lbs psi.

Originally posted by S10All422S



taylor, a buddy of mine from NZ should be emailing you and i got your email for the mag

werd, im just replying to his email right now!

thanks mike

Originally posted by Chopped Mazda



Originally posted by slamdblazer



Yea im not tryin to drill a spindle out lol, if i dont have too. What do you thinks better? the shaft or a grade 8?

well, if your not trying to drill your spindle......then the machined shaft to fit the taper of your spindle is probably your best bet. We make them from chromoly high tensle steel, its 28-34 rockwell, the material we use is just as strong as a grade 8 bolt, tensile stregnth is 95,000 lbs psi.



95000 lbs thats it? im looking for like atleast 150,000. lmao jus playin thats crazy tho, umm u probably wont here from me for a couple weeks maybe but will deffinatly be gettin those from ya. thanks for all the help later.