lets see some civics on bags

ok i have another question for those of you that have cut your rear fender wells outdid you do any reenforment before you cut them. im used to cutting on things with frames not uni-bodies thats why i have all theses questions i just wanna make sure i dont buckle the car when i start cutting

I have got a estimate of about 4 grand, And that shop is a good shop, I wish i had it cause my car is just sitting waiting for it!
I should have left the cans on until I had the money!

wat shop is it i didnt brace mine an it is fine i cut from the back of the gas tank to the back hatchand about 2 inches from the side windows

i heard that green civic came apart on the way back from slam sesions. mount ripped from the firewall. i didn't see,just what i heard. the cantilever in the rear looks hot though , not the death trap i heard it was.....i hope

Originally posted by draggn97civic



ok i have another question for those of you that have cut your rear fender wells outdid you do any reenforment before you cut them. im used to cutting on things with frames not uni-bodies thats why i have all theses questions i just wanna make sure i dont buckle the car when i start cutting

I ran a cros brace in the shape of an X in my accord wagon in the back when I cut the rear, no buckle at all. the front I used a piece of 90 degree bent DOM where the windsheild washer bottle was and on the opposite side as well.

I dont have any pics of the rear but basically it went from the bridge to where the top of the seat belts attached, in that area

Here you can see the passenger side front support

what bags are all of you running cause i was thinking about slam re5s

Originally posted by draggn97civic



what bags are all of you running cause i was thinking about slam re5s

I would go with an RE6 at the least.

i got firestone 2600 and 2500 up front

Originally posted by minidragger



i heard that green civic came apart on the way back from slam sesions. mount ripped from the firewall. i didn't see,just what i heard. the cantilever in the rear looks hot though , not the death trap i heard it was.....i hope

the mount on the fire wall started to pull off we had run a piece of 3/16" behind the fire wall to strengthen the mount but it wasnt enough. we got it fixed now and every thing works great

Originally posted by draggn97civic



what bags are all of you running cause i was thinking about slam re5s

RE 6'S YOU WONT'T LIKE THE RE5'S, I HAD RE 5'S DIDN'T GET ENOUGH LIFT AND THEY RODE VERY STIFF BECAUSE OF THE AMOUNT OF PRESSURE TO LIFT THE CAR.