clutch master cylinder

need the best way to relocate the clutch master cylinder any help would be great

i just mounted mine on the little access panel for the wipers. Just shot a couple of sheet metal screws in there and it worked fine.

i moved my reservoir but yeah my clutch master cylinder is in the way too. i have looked at it and am clueless as how to move it half way easy. i dunno though guess i will do a 302 and auto trans, that will work

i figured it out i bought one for the 94 to 97 ranger and bolted the bracket 2 in over and mounted the rod on the other side of the pedal it work good

what makes the 94-97 differ? did that clear for 20's you think.

if that dont work, move it in further and make the pedal widen out so the rod stays the same.

with my 720 i took and made an arm that pushes the opposite direction so my master cylinder is backwards and is filled under the wiper cowl

the way i done it work perfect havnt had any problems

You could use the ole school method and mount it in the frame rail area under the floor. There are many kits out there for this type of an application.