K
06 ram 1500 parts
blackz151
+1y
Will the 03-05 parts fit? Iam lookin for upper and lower control arms and spindels. But i cant find anything for the 06
thacru78
+1y
McGaughy's offers a 2 inch drop spindle. Ekstensive is selling the LCA that most people are running. Aaron Iha is the only person selling uppers. His kit comes with uppers, lowers, and new knuckles to use unijoints. Not sure if it works with the 06 though.
blackz151
+1y
dou know how i get ahold of aaron?
thacru78
+1y
http://www.chassis-aaroniha.com/
Here's the website. The kit narrows the track width of the front by 1.75 inches on each side, giving you more room for larger wheels.
The kit is $2300 and includes: upper and lower arms made from DOM, 4 1-1/4 heim joints with 8 misalignment spacers, 2 3/4 heim joints with 4 misalignment spacers for tie rods, machined tie rod end adapters, plate spindles, 2 firestone 2600 bags, 2 shocks, all hardware and a fabricated bracket that welds to your frame for correct bag and shock location.
It has 9 inches of travel, and has 4.5 inches of camber change throughout the travel of the suspension. -3.5 layed out and +1.5. Badass kit.
Couple pics of it. It's a nice kit but I think you will need more lift out of it if your planning on running big wheels. You could possibly use a Slam bag and get more lift, i'm not sure. Also, i think there's more options out there to achieve the same affect with more benefits and cheaper price. But for someone wanting mostly bolt-on this is the way to go.
Here's the website. The kit narrows the track width of the front by 1.75 inches on each side, giving you more room for larger wheels.
The kit is $2300 and includes: upper and lower arms made from DOM, 4 1-1/4 heim joints with 8 misalignment spacers, 2 3/4 heim joints with 4 misalignment spacers for tie rods, machined tie rod end adapters, plate spindles, 2 firestone 2600 bags, 2 shocks, all hardware and a fabricated bracket that welds to your frame for correct bag and shock location.
It has 9 inches of travel, and has 4.5 inches of camber change throughout the travel of the suspension. -3.5 layed out and +1.5. Badass kit.
Couple pics of it. It's a nice kit but I think you will need more lift out of it if your planning on running big wheels. You could possibly use a Slam bag and get more lift, i'm not sure. Also, i think there's more options out there to achieve the same affect with more benefits and cheaper price. But for someone wanting mostly bolt-on this is the way to go.
blackz151
+1y
i saw in another post u made ur own fuel cell. Do you make them to sell or u just made one for ur use? All the ones i see in jegs and stuff are only 11 inches deep and i want to be able to use my stock pump and stuff........
thacru78
+1y
I don't neccessarily make them to sell but I can make you one. I can make it out of steel or aluminum. Of course aluminum is alot higher than the steel but both function about the same. I coated my steel tank with Por-15 and I never had any problems with it. The tank on the new frame is an aluminum one. It's not finished yet but it holds 45psi of air overnight so I know its sealed. haha I still have my steel one from my old frame that slide between the frame rails. I would be willing to sell it for $75 and you pay shipping. It accepts the factory sending unit and all. You can see pics of it in my profile. It holds about 25 gallons.