AutoLoc Programming REMOTE??

Guys help i need instructions how to program a autoloc remote asap..thanks alot...

have you checked with autoloc?

yes i did check with them and they said to speak online with a rep and thier live chat doesnt work..

my wife threw my set of keys out by mistake and my keys n autoloc remote was in that bag..so this i had to replace the key lock ignition and get a new remote... they sell replacement remotes for 89.99$$ plus shipping that way too much i think.... but my friend gave me a spare one that looks exactly like my old one..is thier a way i can program it to use in my exsiting system??

i had a problem with a kit i installed and the way we went about 'reprogramming' it, was a pain in the ass and it took me bitching and yelling at them on their tech support line to get anywhere with them.

worthless company. imo.

Edited: 7/23/2007 6:58:24 PM by eatinpavement

what model is it?

It might not help, but the way you program a new remote to my SPAL poppers is this:

Find the button by the signal light that lights up red. Press this button 3 times in a row and the light should flash. Then within 10 seconds press the CH.1 button on a remote and hold for 30 seconds. The light should blink 3 times at this point if it worked.

Edited: 7/23/2007 7:03:09 PM by eatinpavement

...

thanks guys , so i called again and man they put me on hold for like an hour i fuckin hang up lol thats killer...

the instruction on thier FAW Page say's.. Switch ignition to ON and then hold the velt push button down for 30 seconds until the lights blink and program.. and that all it says.. that didnt work.. he lighs never blinked..humm..