slammedstroller
+1y
OKAY FIRST OFF I DON'T HAVE ANY PICS WITH THE 20S... SORRY I DON'T KNOW WHAT ALL OF THE FUSS IS ABOUT WITH MAZDA'S AND 20'S EVERYONE THINKS YOU HAVE TO GET ARMS AND RELOCATE BOOSTERS AND SLAVE CYLINDERS ... WRONG! MINE IS LAYING 20'S WITH 30 SERIES TIRES THAT I BORROWED FROM A FRIEND FOR MOCH UP PURPOSES ALL THAT I DID WAS DROP SPINDLES... AND OF COURSE BAGSAND ON TOP OF THAT MY CROSS MEMBER IS DRAGGED DOWN TO THE BOLT HEADS MY STEERING IS ALL STOCK, I DIDN'T NOTCH THE FRONT FRAME FOR ANYTHING, OH BUT I DID TWIST THE SLAVE CYLINDER ABOUT 30 DEGREES TOWARDS THE PASSENGER SIDE TO GET IT OUT OF THE TIRES WAYAND I TUBBED OUT THE FIREWALL
suckafree
+1y
from what I have heard you only need control arms to correct the harsh camber aim spindles give you. I know Chris (unusualfabrication) did some arms I believe just to fix that problem...not to help the truck lay.
slammedstroller
+1y
THERE IS NOTHING HARSH ABOUT MY CAMBER ANGLE... ACTUALLY IT IS PERFECT AT RIDE HEIGHT
flameds10(tyler)
+1y
my mazda lays on 20's with aim spindles and we reangled the uppers 15 degrees down
maz2low
+1y
I have been laying on 20s with 255/35/20s with Stock Modified upper Camber Angle . Notched Lowers and Flipped lower ball joint . Pretty much as stock as you can get and and lay full rockers . Laying with 30 series tires is not a big deal . But truck looks good in pictures . Wish 30series 225 wide tires were around when i layed my truck out .
slammedstroller
+1y
MY ARMS ARE STOCK AND SO ARE MY BALL JOINTS EXCEPT THE LOWER S-10 THAT CAME WITH THE SPINDLES
unusualfabrication
+1y
Edited: 8/28/2007 12:39:10 PM by UnusualFabrication
Another reason that he wanted arms made was because he wanted the strut rods eliminated and tube arms look alot better. The wheels and tires he was running were a bit wider then normal so I shortened them to make up for the extra half inch that the AIM spindles stick out further than stock spindles. It could lay on 22's if he had 22's, lol.
Another reason that he wanted arms made was because he wanted the strut rods eliminated and tube arms look alot better. The wheels and tires he was running were a bit wider then normal so I shortened them to make up for the extra half inch that the AIM spindles stick out further than stock spindles. It could lay on 22's if he had 22's, lol.
no1lowr
+1y
maybe your confused, mazda on 20s is not the problem, its mazda on 22s that people converse about, mazda on 20s is nothing hard and has been done plenty of times, mazda on 22s is the issue you might be reffering to. here is a dawg on 20s.