4ontheFloor
+1y
Originally posted by doordraggintaco
^^^easier said than done..
easier done than said. I've had an 88 4Runner on an 88 truck frame since 96. all it takes is new body mounts. in my case trimmed them off the runner frame... front six body (cab) mounts lined up fine shimmed the body off the frame to level.... bolted the mounts to the body and welded in place on the frame. Easy. Hard was tearing it all down in '01 for a supra rear, SBC,TH350, and SF bd and losing interest in it cause I bought my '72 3 door that fall. six years later still in pieces. at least it indoors.