one_low_sixty8
+1y
So i made a new Tranny Crossmember today for the 02 Silverado, trying to get the front to lay harder. All in all, it turned out pretty bitchin. Used 2x4 .188", 1 1/8" Solid stock drilled out for a 5/8" grade 8 bolt, 3/16" plate for the sides of the mount, and 1/4" plate for the top of the mount. All TIG welded. I still have the jig set up if anybody needs one. KP components sells these for $160. so let me know what you think..
or the KP Components