Page 1 of 2
Isuzu \ how to mount engine compressor??how to mount engine compressor??
views 1265
replies 11
following 6
dguzzardo22
+1y
ok im looking at some york compressors and what to know what it takes to install them and whats all needed or will anybody sell me one so i can just bolt it on and run my stuff?? whats the whole deal with the engine driven compressor for the 1990 isuzu pup ??
blazed22s
+1y
heres how i did mine,
i took off the smog pump, and cut the bracket down,
then i plugged up all the things on the engine that came from the smog pump,
and i made a simple bracket, to hold the compressor where the smog pump was.
and then i made a way to tighten the belt, and bolted it to the bottom of the york, and it pushes on the old bracket for the smog pump. it works damn good!
you can see it by the belt in this picture
i took off the smog pump, and cut the bracket down,
then i plugged up all the things on the engine that came from the smog pump,
and i made a simple bracket, to hold the compressor where the smog pump was.
and then i made a way to tighten the belt, and bolted it to the bottom of the york, and it pushes on the old bracket for the smog pump. it works damn good!
you can see it by the belt in this picture
dguzzardo22
+1y
well thanks alot .. where did you get your parts and about how long did it take you ???
blazed22s
+1y
the metal was just a piece of angle, i think like 3"x3" that i had layin around, and the bolt was from tractor supply.
it took about a day, but i take ALOT of breaks haha. and alot of test fitting and such to make it not hit the valve colver and timin belt cover. other then that it was pretty easy. the bolt on the bottom set up is pretty easy also.
its basically a nut welded to another peice of angle steel, which is bolted to the compressor, and then a bolt and jam nut were put in place.
it took about a day, but i take ALOT of breaks haha. and alot of test fitting and such to make it not hit the valve colver and timin belt cover. other then that it was pretty easy. the bolt on the bottom set up is pretty easy also.
its basically a nut welded to another peice of angle steel, which is bolted to the compressor, and then a bolt and jam nut were put in place.
90isuzupup
+1y
Originally posted by dguzzardo22
ok im looking at some york compressors and what to know what it takes to install them and whats all needed or will anybody sell me one so i can just bolt it on and run my stuff?? whats the whole deal with the engine driven compressor for the 1990 isuzu pup ??
if you ever happen to find a bolt on kit, be sure to tell me
ok im looking at some york compressors and what to know what it takes to install them and whats all needed or will anybody sell me one so i can just bolt it on and run my stuff?? whats the whole deal with the engine driven compressor for the 1990 isuzu pup ??
if you ever happen to find a bolt on kit, be sure to tell me
dguzzardo22
+1y
...Nick... give me a price and you build it and ill buy it. the compressor and brackets and everything that'll work and ill buy and mabey 90isuzupup will to .. thats 2 people
dguzzardo22
+1y
also is the stock ac compressor useable..??? and what cars can i pull there ac compressor out an use that one and make my own??
eatinpavement
+1y
will an isuzu motor even turn a york while driving? lol. is your truck bodydropped? wander if there would be any clearance issues with the york bodydropped? i have seen people use the stock a/c sanden for air.