UNIBALLS

Originally posted by bigjon



how about full size rams 02+

WERD.

we have them, i have that drawing on file also.

we can either make you complete arms for your truck, or sell you teh uni-joint kits to make your own.

Taylor

IM JUST GONNA NEED THE UNIBALL KIT THEMSELVES THAT WILL WORK ON AN F150 ARM.

hey taylor do you have any pictures of the ranger arms you are going to offer. i have yet to see pictures. and do you just sell the tapered shafts or only with the uniball kit?

Hey taylor have you made any of those shafts that will fit into a ranger spindle? Dose you kit come with everthing in the picture but the arms?

Taylor, Do you make a set control arms with the uniball for a 88 Chevy fullsize. If so what kind of price range is a guy looking at. Is there any kind of alignment or camber issues with this type of setup. Thx

Originally posted by maxpower98



hey taylor do you have any pictures of the ranger arms you are going to offer. i have yet to see pictures. and do you just sell the tapered shafts or only with the uniball kit?

No pics of the ranger arms as of yet, they are still in the design phase, but you can bet they will look very similar to our other uni-joint arms, smooth bends and fully tig welded.

Were auctually waiting for someone to auctually purchase a set of the ranger arms before we fully start producing them yet, we havent had anyone auctually order a set yet, just alot of talk so far.

Once we get an inital order, we will show the complete details on the arms.

We usually do not just sell the tapered shafts, mainly because we dont know what MA spacers your using them with, or what application your using them with, and we dont want anyone to be putting them in an application that isnt what their intended.

Taylor

Originally posted by low99maz



Hey taylor have you made any of those shafts that will fit into a ranger spindle? Dose you kit come with everthing in the picture but the arms?

we can make a kit for ANY vehicle. And yes we do have a kit for all year rangers.

Unijoint kits comes with :

The kit includes:2 - 1" spherical bearing2 - Weldable cups to press the bearing into2 - Tapered shafts to fit YOUR spindle (any vehicle.2 - Standard alignment spacers2 - Upper flush caps2 - Snap rings

The price is 289$ per pair. (does 2 arms)

essentially, yes the kit includes everything besides the arms. The kit will allow you to make two control arms, uppers or lowers.

thanks

Taylor

Originally posted by clunn78



Taylor, Do you make a set control arms with the uniball for a 88 Chevy fullsize. If so what kind of price range is a guy looking at. Is there any kind of alignment or camber issues with this type of setup. Thx



I replied to your PM

thanks

Taylor

Edited: 11/3/2007 2:16:03 PM by low99maz

Will the kit for a ranger come with the end of the balljoint as the machined shaft?

Originally posted by low99maz



Edited: 11/3/2007 2:16:03 PM by low99maz

Will the kit for a ranger come with the end of the balljoint as the machined shaft?

yep, all of our kits are machined specifically for YOUR vehicle, so they drop right in and bolt up no problem.

we allways thought that drilling out your spindles was fucking stoopid, so this tapered shafts saves you from ruining your expensive drop spindles.

Taylor