how do i free stickin valves

I have the same blocks, if im thinkin the same as you. They're very easy to take apart. First take off the 9/16 bolt that holds on the solenoid. Once that slides off, you'll see that that you can get a deep socket and take out the brass shaft. You'll see all the water and dirt gunked up inside the shaft. Just wash all the shite out and dry it up. Also be sure to clean the o-rings, if they look worn replace them. It also doesn't hurt to give them a some wd-40.

Originally posted by soccorjimmy



Edited: 12/10/2007 3:46:58 AM by soccorjimmy

How about if the bags air up over night. I have GC 450's 1/2. Do I need to take them apart and clean them. JIMMY

Throw them away and get you some parkers lol!!! Or, you can go to autozone, oriley's and get some graphite (it's a dry lubricant). Tear your valves apart stretch the spring a little and clean them out. Then put a little graphite on the diaphragm and your good to go. Just remember a little graphite goes a long way.