Spindles for a carpice?

What spindles and control arms can be used on front sunspension of a caprice wagon.

anything for an astro will work alos check out streettrends the make stuff for the caprice/impala http://www.streettrendsinc.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=BBODY&Category_Code=CHAS

summit has stuff to and the wagon and caprice spindles are one in the same

Thanks for the info. I was told you could take spindles from a fullsize, and someone else told me you could use s-10 spindles.

Astro spindles will not work, by the way... unless you have the heavy duty police/impala 5/8" lower balljoints which were spuratically used in 1995 and into 1996.

Originally posted by NCrobby



you dont actually need them. my car has stock spindles and control arms.

R U shure about that? You build it?

you can lay a pretty damn large tire on stock spindles and arms. we did my buddies on huge whitewalls. tires are 27-28 in tall( i can remember but they're bigger than most 20's) and we did just trimmin on the pocket and lower arm. could go more with some real cutting and pie cut upper.

Edited: 1/4/2008 3:37:16 PM by TiMe_1

My 91 caprice with lay my 20's with 255/35 rubber without drop spindles. All you gotta do is notch for tie rods and cut the pockets

Cool, thanks for all the info guys.

wheres the best place/brand to get drop coils?