Barely Legal Ball Joint Control Arms $439.99 a set!

Edited: 1/17/2008 8:25:29 AM by Barely Legal Welding

Finally!!

We have finally gotten around to designing and getting pricing on our new Balljoint upper and lower control arms.

This line of arms that were putting out now, are our K.O.A.B series, and they are our entry level arms in price.

The price of 439.99 is the most basic of prices, and includes the following:

Upper control arm (Bare)
-Poly bushings, and washers.
-You will have to use your stock x-shaft and provide the balljoints

Lower Control arm (Bare)
-Poly bushings, and bolt sleves
-You will need to povide the balljoints

From that base price of $439.99, and the above product, we offer upgrades to the arms, to make them to any level of complete that the customer wants


Pair of moog upper balljoints - + $39.99
Pair of Moog Lower balljoints - + $39.99
BLF Uni-Balljoint (xtra travel compared to a std balljoint)- + 150.00
Moog Cross shaft - +99.99
Powder coat any color - +60.00


Even our nearest competitors prices are priced higher than that, and we are able to offer the arms at any level of complete that you need, depending your your personal situation.

All parts are still made of Thick DOM tube, the upper control arms will feature a very trick upper balljoint plate with the BLF logo in it, and the lowers still feature a thick DOM tube and a thick bag mount plate. And just like any other product we make, you get a LIFETIME warranty on anything we build.

Just wanted to post this up, so the people who have been PMing us know their price and and that they are finally available, with a price lower than we origionally anticipated.

Thanks
Richie

I suppose you will only be making this for the s10 series trucks no imports? There are alot of people hurting that own frontiers. Last time I talked to steve at cando he said they were on hold. And no one else really makes them..So whoever ends up doing it...I think the main design should anyone design this for the frontier would be to build the setup to eliminate the strut rod. Also allow for bolt in ball joints as the frontier uses pressed in. Maybe a yota conversion setup? So keep this in mind if you want to sell arms to us import guys. By the way doesnt taylor answer his emails?

Edited: 1/17/2008 9:01:59 AM by Barely Legal Welding

Edited: 1/17/2008 9:01:43 AM by Barely Legal Welding

I can build you arms for your truck no problem, we build one offs all the time. We can also machine the Unijoint shafts to fit any spindle you want to put on there. Can you give me a call today some time? 989 671 3729 ask for RIchie

If you are sending to his Taylor@barleylegalfabrication.com he had some problems with it but it should be all fixed.

Richie

any pics of these new arms?

heres the link to the website with a pic. The uppers have a new looking plate and the lowers are the same as the Unijoint arms just a ball joint cup insted of the Unijoint cup.

http://www.barelylegalfabrication.com/catalog/product_info.php?products_id=219&osCsid=19fb09d2c6c8d4319a1af74a297773cc

Richie

Slightly off topic but would you happen to know the taper measurement for an s 10 upper ball joint? I have to have a set of mazda spindles redrilled to accept this ball joint and need the measurement to make sure I get the right taper ream. Thanx in advance

What one , there are a few differnt measurements you need to machine a taper? You would have to call and let me know what you are looking for.

Thanks
Richie

I didn't realize there were multiple measurements involved. I'm not a rookie here, don't get me wrong, I just have a minimal amount of machining experience is all. I'll give you a ring when I'm at work tomorrow (free long distance,lol) Thanx for the response.

is it for imports also???? I am interested in nissan arms if possible

im guessing this price is for a pair of uppers, or a pair of lowers?