Cruz Lo
+1y
Thanks for all the positive responses.
OK I added some more pics and got the stupid video to work!
I went through alot to get to this point. I cut off the first frame I made cause it flexed too much! Now using 3X4X1/4 under the cab then 2X4X3/16 for the rear clip.
Just one of many mistakes I made and had to re-work.
24" all around. Vintage air under the dash gave me room to relocate everything out from under the hood.
Since I had to re-wire everything I had to be sure the truck would run before I move on.
The Truck drives and handles great. I am very happy about that.
I will take it apart again soon for powertrain work. Gears, converter, cam, custom tune.
I will most likely just put tubs in the rear and drive it this year to some shows.
Then take everything down to the frame for paint etc..The rockers can be cut 1" so they are even with the frame. That's why you see those unpainted blocks tacked to the frame.
But you know how plans can change so who knows.