Page 1 of 2
Body work and Paint \ Looking for Flush Mount LED'sLooking for Flush Mount LED's
views 360
replies 12
following 13
Rigo
+1y
Curious if anyone has recently purchased some Flush mount Leds or has a set on there truck that they may want to recomend... Thinking of going with one long strip along the bottom of the tail gate.
if you dont mind let me know where you got them? and around how much you paid for them?
Posting pics of installs would be nice too!
Thanks In Advance!
if you dont mind let me know where you got them? and around how much you paid for them?
Posting pics of installs would be nice too!
Thanks In Advance!
nixon186
+1y
Edited: 2/27/2008 12:56:54 PM by nixon186
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
bagdb2200
+1y
Originally posted by nixon186
Edited: 2/27/2008 12:56:54 PM by nixon186
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
How did you wire it? You don't need a TAC module for Custom Classic lights. The dual circuit lights are wired for 3 wire systems, and for 2 wire systems you just wire the 2 positives together.
Edited: 2/27/2008 12:56:54 PM by nixon186
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
How did you wire it? You don't need a TAC module for Custom Classic lights. The dual circuit lights are wired for 3 wire systems, and for 2 wire systems you just wire the 2 positives together.
StreetNshow.com
+1y
Edited: 2/27/2008 1:10:20 PM by rangerfor22s
Edited: 2/27/2008 1:09:27 PM by rangerfor22s
Originally posted by Rigo
Curious if anyone has recently purchased some Flush mount Leds or has a set on there truck that they may want to recomend... Thinking of going with one long strip along the bottom of the tail gate.
if you dont mind let me know where you got them? and around how much you paid for them?
Posting pics of installs would be nice too!
Thanks In Advance!
IMO, The Company Hi-tech l.e.d. would be the way to go, but there over 600 dollars for a 48" but heres a pic, i have one on my ranger
If you wanted to go a cheaper route, we carry some off brand 48" for 249.95, just click the pic below
Edited: 2/27/2008 1:09:27 PM by rangerfor22s
Originally posted by Rigo
Curious if anyone has recently purchased some Flush mount Leds or has a set on there truck that they may want to recomend... Thinking of going with one long strip along the bottom of the tail gate.
if you dont mind let me know where you got them? and around how much you paid for them?
Posting pics of installs would be nice too!
Thanks In Advance!
IMO, The Company Hi-tech l.e.d. would be the way to go, but there over 600 dollars for a 48" but heres a pic, i have one on my ranger
If you wanted to go a cheaper route, we carry some off brand 48" for 249.95, just click the pic below
nixon186
+1y
Originally posted by DroptSdime
Originally posted by nixon186
crap...im lookin at the install diagram on their website and your right.is there something in the pigtail to reduce voltage?i thought the pigtails were just connecting the existing wires on a 2 wire system.i just ordered my tacs last night too.
Edited: 2/27/2008 12:56:54 PM by nixon186
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
How did you wire it? You don't need a TAC module for Custom Classic lights. The dual circuit lights are wired for 3 wire systems, and for 2 wire systems you just wire the 2 positives together.
Originally posted by nixon186
crap...im lookin at the install diagram on their website and your right.is there something in the pigtail to reduce voltage?i thought the pigtails were just connecting the existing wires on a 2 wire system.i just ordered my tacs last night too.
Edited: 2/27/2008 12:56:54 PM by nixon186
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
How did you wire it? You don't need a TAC module for Custom Classic lights. The dual circuit lights are wired for 3 wire systems, and for 2 wire systems you just wire the 2 positives together.
CLNSHVNnDRAGGN
+1y
Got mine through Can-Do Specialties about 4 years ago and haven't had a single problem with them. Price wasn't bad and I got them in half the time they estimated.
MIDWEST DRAGFEST
+1y
Originally posted by nixon186
Edited: 2/27/2008 12:56:54 PM by nixon186
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
that place is awesome never had a problem with there lights. i had a 52" led bar in my roll pan. the leds ran me 160 and the the roll pan i picked up for another 60
Edited: 2/27/2008 12:56:54 PM by nixon186
i got 2 10" dual color led flushies from customclassic.com.there was a sale in december...i got'em for around $100.good quality and fast shipping.my toy is a 3 wire taillight and my leds are 2 circuit so i had to order a pair of tac units for $60. keep that in mind when your ordering everything(if your vehicle is 2 wire then you wouldn't need the tac units.if you have a 3 wire setup you could get a light with 3 circuits per side and avoid the tac unit also.)
that place is awesome never had a problem with there lights. i had a 52" led bar in my roll pan. the leds ran me 160 and the the roll pan i picked up for another 60