threads
Page 1 of 2
Chevy/GMC Trucks \  baggin my fullsize

baggin my fullsize

Chevy/GMC Trucks Make Specific
views 193
replies 10
following 4
 
societyoutkast   +1y
Edited: 3/31/2008 12:22:10 AM by society_outkast

well i have a 95 single cab stepside i'm gonna lay it out on the 20's it has now but set it up to lay out on 22's

i want the truck to be a daily driver for sure so what should i do suspension wise to get a really good ride and good lift and still be able to lay out ??

what all should i run parts wise and what kinda lines and fittings...i know i'm doin 1/2..and some dual 480's..but what else would i need to ease the project
urdaddy   +1y
just a tip..dont mention the two link if you want any questionos acctualy replyed to...it will be a hate thread in a matter of hours....as far as your question im not sure what your looking for...but ekstinsive has a kit for the rear and front i belive ..and make a list and order it all at once ..dont wait like i always do and buy them as you go..will make you hate life less...oh and if you run 1/2 inch and you want it to look clean your gona need a tubeing bender that will bend it..mine was 120.00bucks..just a thought
societyoutkast   +1y
ive got a tubin bender that i bought when i was runnin hardline for my juiced mazda

i'm just lookin for tips on what to use what not to use and anything helpful on baggin these trucks
dragginon22s   +1y
I just started my 93 step side, i'm using bags on lower bars, all slam re8s,york 209 engine comp, I got most of my stuff from gravity werxs plus if you run 22s later you will want to get after market control arms when you get your wheels, and for vavles i'm using smc 1/2".
plus i'm keeping my gas tank in stock spot just raising it and running wishbone on for my top bars i will take some pics when i get it done if you want me to.
societyoutkast   +1y
anybody got any pics of their rear set ups and how much lift ya'll gettin
dragginon22s   +1y
as soon as my four link gets here and i get it on i will take some pics for ya.
societyoutkast   +1y
alright
ga,mazduh   +1y
if i was you i would build a solid three link with bags on bars and u should get plenty of lift. slam re8's will be the bag of choice for ur application. and as far as valves 1/2 danz or asco r the best in my OPINION. and as far as control arms u can lay on 22's all day with stock control arms and drop spindles(with some mods to both of course) and hrd line is not neede but is 1 of the better choices if u want no leaks hope i have answered all ur questions and just holla if u have any more questions. we have recently done 1 so all this is fresh on my mind .......LOW INTENTIONS 4 LIFE
societyoutkast   +1y
cool u got any pics ?? i appreciate the input guys
ga,mazduh   +1y
yea but i suck at postn pics they r on my myspace page .... ericlaydsonoma@yahoo.com if u want to look. u have to dehump the lowers and notch the uppers so that they dont hit the mount if u know what im sayn ......LOW INTENTIONS 4 LIFE