threads
Page 1 of 2
Tools \  brake line tools

brake line tools

Tools Q & A
views 2158
replies 17
following 14
 
slammedstroller   +1y
okay I just bought all new brake line... the only stuff that they had that was long enough was a roll... how in the f#ck do I get this crap strait?? there has to be a tool out there
Uncle Fester   +1y
No tool or any amount of patience will get it straight I know I have tried. If it a small enough vehicle the bends might hide some of the uneveness, if not maybe look at the 4 foot sticks and some unions to have a straight run. Good luck and hope you can get it figured out.

P.S. I need a good flaring tool, any ideas?

bodydropped85   +1y
snap on's flaring tool is the shit. the ones from home depot are junk.

http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=16276&group_ID=1338&store=snapon-store&dir=catalog

they also got one thats 45 bux, but i have never used it, i have used that one tho.

http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=75291&group_ID=1338&store=snapon-store&dir=catalog
fatboysS1O   +1y
id imagine you could walk it out like copper.
Cruz Lo   +1y
Master Cool makes (for me) the best flaring kit out there. Hydraulic flaring. GM push to connect, and double 45 flare for brakes, Snap on sells it.Eastwood sell it.And toolwarehouse.net This is the one I have http://www.thetoolwarehouse.net/shop/MAS-71475.html

Still expensive, but Much less than snapon for the same thing.

You can straighten the line if you are carefull. All the line on my truck was bought in rolls, even the 3/8 stainless for the air system. It came our fairly straight IMO.

I held the end of the roll in one of the clamping dies (came with the flaring kit) in my bench vise. Then you can unroll the tubing pulling straight and hard.



Good luck.



post photo
thacru78   +1y
Summit has one.....
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DCSUM2401&N=700+115&autoview=sku

Never used it...but i'm looking for one right now also. As well as braided brake lines. Hey Russ, I know gravity werx makes stainless lines, can they make brake lines also....
fatboysS1O   +1y
we do the steel braided but not hard lines.
thacru78   +1y
That's what i'm looking for......What kind of price for them. Is it by the foot or what. Is it on their website.
fatboysS1O   +1y
http://www.gravity-werx.com/index.asp?PageAction=VIEWCATS&Category=133

theres you a link BIG, just some diff ones, but click on the one on the bottom right and itll tell you what to do in order to order diff sizes,etc.
Uncle Fester   +1y
Originally posted by Cruz Lo



Master Cool makes (for me) the best flaring kit out there. Hydraulic flaring. GM push to connect, and double 45 flare for brakes, Snap on sells it.Eastwood sell it.And toolwarehouse.net This is the one I have http://www.thetoolwarehouse.net/shop/MAS-71475.html

Still expensive, but Much less than snapon for the same thing.

You can straighten the line if you are carefull. All the line on my truck was bought in rolls, even the 3/8 stainless for the air system. It came our fairly straight IMO.

I held the end of the roll in one of the clamping dies (came with the flaring kit) in my bench vise. Then you can unroll the tubing pulling straight and hard.



Good luck.







Yours turned out badass, I feel like a failure now. I need to try harder I guess, great setup.Thanks for the links on flaring... at over $300 for it I only need 2 flares, will just find a place.

post photo