nned help on what to use juice or air and need pics please

Edited: 5/5/2008 12:16:13 AM by TuckingLugs05

alos juice guru's what ctlinder should i use on the front also ...and to three wheel and dog leg will any cylinders work?..would 10" be to big for the front and whats the stroke on hydro cylinders

Don't have any pics of mine but I didn't use my stock struts because the cylinder didn't fit in them. Instead I went to the steel yard and found some tubing that the cylinder fit snug in. Cut the lower mount off the stock strut, welded it onto the tubing and was good to go. For cylinders I would go with Pro Hopper competition because of the triple seals. Size will depend on how much room you have in there. I was only able to go with 6's up front but it gives me enough lift to go from completely laid out to almost 2" over the tires on 20's. In the back you can go bigger because you have don't have to mount them upside down and you have a lot more room to work with. I went with 8's out back and get about the same amount of lift as the 6's up front. Can't help you with the 3 wheeling because I don't do it with mine. Make sure you get a good set of accumulators. I recommend Parkers if you can find them.