F150 front end on 22's need help...

man fuck running a hydroboost, just get a similar ford booster, like an older explorer or a 93 mustang as long as the master cylinder is the same. if u need to u can drill new bolt holes in the firewall, and extend the rod to the pedal

PUT AN OLDER BOX STYLE EXPLORER OR RANGER BOOSTER ON IT. I DID MINE IN LIKE AN HOUR. VERY VERY LITTLE MODIFICATION TO THE ARM THAT CONNECTS TO THE BRAKE PEDAL BUT WAS ABLE TO USE STOCK F150 MASTER CYLINDER AND IT STOPS JUST LIKE IT USED TO AND CLEARS ARM BY ABOUT AN INCH. HOPE THIS HELPS

I saw this done before and I'm trying to remember all the details. I know that the ball joints were replaced with Chrystler ball joints and flipped I think. You have to ream the spindle to accept the new joint.The way it articulated when raised and layed out was a bitch too. I'd consider Z-ing the frame.

Any up dates?

i have a 2006 f150 lowered on 22s

i have a 06 f150 lowered on 22s