92 ranger front suspension

I just put in my radius arm relocater and tommrrow im puttin in my raised transmission crossmember, and im gettin closer to baggin my truck, but i need a little guideance... I have the front bag mounts from FBI and is there some exact angle for me to mount the mount at? I have this pic and im wondering if anyone can help me out a little more before i start on this. Pics are greatly appreciated


also, the driver side frame is recessed in more than the passenger side, anyone got pics of the driver side?? and i know someone is gonna bring up a yota clip or MII clip, but i already have everything to do my truck now, i dont wanna buy a clip too

Im in the same boat cuz. The I beam set up is a bitch but all I hear is clip this and that. stick with your guns and drop the I beams. It can be done. What one man can do another can do!

go to www.itdontstop.com,chapters,past rides,my old 91 had tube mounts,but theres some pics to refrence,it rode perfect,ant the bags collapsed evenly too..

I would install the lower bracket on the beams first. Then jack up the I-beam where it would be with the truck laid out. You could use big c-clamps to hold the upper brackets in place to test out your positioning of it. I like to use a piece of 3" square tubing for a spacer when setting up a bag mount, but you may want to bolt in the bag and cycle the suspension to see how the travel and affect on the bag is. Just my 2-cents.

dont FULLY weld anything till you know its gona lay. also dont angle them to much.