Page 1 of 2
Nissan Trucks \ bagging a 4wd pathy..updated 11-15-08bagging a 4wd pathy..updated 11-15-08
views 737
replies 14
following 9
kezark31
+1y
Edited: 11/16/2008 8:27:56 PM by kezark31
Edited: 11/11/2008 12:42:06 AM by kezark31
picked up a 89 2dr pathy AKA "path-grinder"im cuttiung off the stock suspension, and rebuilding it, it got tubular uppers already, question is what would be the best way to build my LCA mounts? i was thinking of just getting the stock hardbody lower suspension cross member and welding it in. but i figure im going this far why use stock stuff.i was thinking using some sperical rodends in a double shear config. i know you can adjust caster via the upper. so i could just use rubber bushings and make it(lca) non ajustable. anyone else done something like this?
Edited: 11/11/2008 12:42:06 AM by kezark31
picked up a 89 2dr pathy AKA "path-grinder"im cuttiung off the stock suspension, and rebuilding it, it got tubular uppers already, question is what would be the best way to build my LCA mounts? i was thinking of just getting the stock hardbody lower suspension cross member and welding it in. but i figure im going this far why use stock stuff.i was thinking using some sperical rodends in a double shear config. i know you can adjust caster via the upper. so i could just use rubber bushings and make it(lca) non ajustable. anyone else done something like this?
kezark31
+1y
Edited: 11/9/2008 10:55:44 PM by kezark31
Edited: 11/9/2008 10:52:57 PM by kezark31
made some progress today got all the 4x4 ripped out. i ended up using a 2wd hardbody lower suspension crossmember, just for ease and quickness of installation. I'm going to triangulate the LCA. need to get a 2wd pan the 4x4 pan hangs down below the 2wd crossmember like 2 inches.oh also found a brake upgrade for the 2wd guys 4x4 calipers are two piston and bolt right on the 2wd spindles just trim the backing plate a little.
Edited: 11/9/2008 10:52:57 PM by kezark31
made some progress today got all the 4x4 ripped out. i ended up using a 2wd hardbody lower suspension crossmember, just for ease and quickness of installation. I'm going to triangulate the LCA. need to get a 2wd pan the 4x4 pan hangs down below the 2wd crossmember like 2 inches.oh also found a brake upgrade for the 2wd guys 4x4 calipers are two piston and bolt right on the 2wd spindles just trim the backing plate a little.
kezark31
+1y
got some more work done today and picked up a 2wd pan to swap on. and ordered my front bag brackets. all that's left is triangulate and bag and gusset the crossmember.
top shot of the suspension all in
had to toss in some shocks so the dam thing would roll....
top shot of the suspension all in
had to toss in some shocks so the dam thing would roll....
cl (chris)
+1y
Edited: 1/22/2009 9:14:09 PM by cl
Update on this truck I own it now.I have big plans for her including all chrome HB front end and new hood minus vents. Finish bagging her and 20"s and maybe a BD
Update on this truck I own it now.I have big plans for her including all chrome HB front end and new hood minus vents. Finish bagging her and 20"s and maybe a BD
boooghar
+1y
oh man that last pic is so f'n old school, the drop and pathfinder wheels on the 1st gen pathfinder .......... WOW
oh man that last pic is so f'n old school, the drop and pathfinder wheels on the 1st gen pathfinder .......... WOW
oldskool66
+1y
looking really good, if you need parts i have enough shit to build two trucks in my garage im up in WA are you going to be a lowdown?
cl (chris)
+1y
--------------------------------------------- Originally posted by oldskool66 looking really good, if you need parts i have enough shit to build two trucks in my garage im up in WA are you going to be a lowdown?
--------------------------------------------- Not sure if I will be going to lowdown I will be hitting up dropzone, mazdafest and any of the other shows in Oregon. How much for a hood chrome grill bumper?
--------------------------------------------- Not sure if I will be going to lowdown I will be hitting up dropzone, mazdafest and any of the other shows in Oregon. How much for a hood chrome grill bumper?