Cando, upper and lower control arms B2200

well, Moog makes a lower store brand line for Oreilly called Autodrive. The autodrive k5208 is the number an S-10 calls for. This balljoint has far more travel than a stock S-10 balljoint since it fits several other GM (Generic Motors) applications. They also make another one thats the same balljoint but with a different shaft.

there are many GM balljoints made by moog for autodrive that have the same body and slightly different shafts. They fit many different GM vehicles from mid 70s to mid 80s mid size cars. there are several different numbers that use that same housing and as I said since they fit several applications that themselves have different stock ride height balljoint angles, they make the slot longer and therefore they have much more travel than stock S-10 balljoints.

Originally posted by low mazda



I had drop spindles on my mazda, and didnt have to ream anything. I used factory balljoints and they fit like a glove

on what arms? stock upper and lower arms or what?

Originally posted by Mad Ra88it



Chris, How much is are a set of these arms?

A full set without balljoints go for $500 and a full set with new balljoints go for $600 a set. I do sell just the uppers or lowers if that's all you need. They come with all new hardware, bushings, and eliminate the factory strut rods. The lowers have the bag plates already attached so all you need is upper bag mounts. They come in a raw finish so you will have to paint, powdercoat, or chrome them. Laying out on 20's isn't a problem with these. They use factory Mazda upper balljoints and S-10 lower balljoints because AIM decided to make their drop spindles use that lower balljoint. If there are anymore questions feel free to ask or call!

Originally posted by 94NissanLaysDoor



Hey Chris, Do you have a website? I would like to see some pics of your control arms...

Sorry, not yet. I haven't had a ton of time to get started on one yet but it will be coming soon. You can see pics in my profile under the Mazda.