Urban Prerunner

The bed is still available. And theres been progress made! The lift is back from powder and on the truck (not every nut and bolt is tightened). We ran into a few snags though. The lower arms were modified to work with a cognito kit. The swaybar mounts were moved to the front/outside of the lower arms which are now directly in the path of the heim steering due to the dropped rack and pinion. And now the coilovers will hit the uppers due to the mount on the lower arms. All of this is going to be corrected this weekend. There was also an issue with the driveshaft. It wasnt going to be long enough and it would run into a crossmember located a few feet back from the transmission. That was solved by purchasing a 2-piece driveshaft from a 2wd extended cab silverado. Now we haveta fab up a crossmember for the carrier bearing. We also haveta get extended power steering lines for the dropped rack and pinion, which i ordered today from Full Throttle Suspension. Here are some pics!