Page 3 of 10
Full Size Truckin General \ stepside chevy, hydroholics installstepside chevy, hydroholics install
views 2960
replies 99
following 40
AON-OFFDAHOOK
+1y
Edited: 6/18/2009 11:23:00 AM by AON-OFFDAHOOK
---------------------------------------------Originally posted by hesS10i love this body step side it is going to be sick! i see another trunk lid idea for this one but 4 battery's and still 24 volt never charge those kinetics again. that colorado would be sick too, i say roll with the new old skool and juice it. 2 pump that sucka so you wont have slow down valve issue i had when pecause the Skinny (Derek) and jeremy did my 1/3 back in the day. for a truck go 2 pump cause of the wieght difference of the motor and empty bed. unless tre5 can figure out a dual slow down valve thingy.---------------------------------------------
You can do dual slow downs off a single pump with 2 3-dump manifolds. You can even run a piece of hardline to connect mate the manifolds together. Pretty trick! I've never done it, but I know it will work...who wants to be the first??????
---------------------------------------------Originally posted by hesS10i love this body step side it is going to be sick! i see another trunk lid idea for this one but 4 battery's and still 24 volt never charge those kinetics again. that colorado would be sick too, i say roll with the new old skool and juice it. 2 pump that sucka so you wont have slow down valve issue i had when pecause the Skinny (Derek) and jeremy did my 1/3 back in the day. for a truck go 2 pump cause of the wieght difference of the motor and empty bed. unless tre5 can figure out a dual slow down valve thingy.---------------------------------------------
You can do dual slow downs off a single pump with 2 3-dump manifolds. You can even run a piece of hardline to connect mate the manifolds together. Pretty trick! I've never done it, but I know it will work...who wants to be the first??????
jetts
+1y
---------------------------------------------Originally posted by AON-OFFDAHOOKEdited: 6/18/2009 11:23:00 AM by AON-OFFDAHOOK---------------------------------------------Originally posted by hesS10i love this body step side it is going to be sick! i see another trunk lid idea for this one but 4 battery's and still 24 volt never charge those kinetics again. that colorado would be sick too, i say roll with the new old skool and juice it. 2 pump that sucka so you wont have slow down valve issue i had when pecause the Skinny (Derek) and jeremy did my 1/3 back in the day. for a truck go 2 pump cause of the wieght difference of the motor and empty bed. unless tre5 can figure out a dual slow down valve thingy.---------------------------------------------
You can do dual slow downs off a single pump with 2 3-dump manifolds. You can even run a piece of hardline to connect mate the manifolds together. Pretty trick! I've never done it, but I know it will work...who wants to be the first??????---------------------------------------------if you guys want to do it for free, you can do my truck with any experiment type bs
---------------------------------------------Originally posted by AON-OFFDAHOOKEdited: 6/18/2009 11:23:00 AM by AON-OFFDAHOOK---------------------------------------------Originally posted by hesS10i love this body step side it is going to be sick! i see another trunk lid idea for this one but 4 battery's and still 24 volt never charge those kinetics again. that colorado would be sick too, i say roll with the new old skool and juice it. 2 pump that sucka so you wont have slow down valve issue i had when pecause the Skinny (Derek) and jeremy did my 1/3 back in the day. for a truck go 2 pump cause of the wieght difference of the motor and empty bed. unless tre5 can figure out a dual slow down valve thingy.---------------------------------------------
You can do dual slow downs off a single pump with 2 3-dump manifolds. You can even run a piece of hardline to connect mate the manifolds together. Pretty trick! I've never done it, but I know it will work...who wants to be the first??????---------------------------------------------if you guys want to do it for free, you can do my truck with any experiment type bs
hess
+1y
i knew the sick mind of skiny would know a way. its just fluid knowledge!!! so a 1/dual 3 cool that might have to be the set up on the vw.
i knew the sick mind of skiny would know a way. its just fluid knowledge!!! so a 1/dual 3 cool that might have to be the set up on the vw.
tre5
+1y
The front cylinders are done. The rear cylinders are tacked in place. I ran out of wire, so I couldn't finish welding everything up. I have the pumps layed out with the batteries and I now know how I am doing everything in the back. Should look pretty neat once I get it in. Yes, Hess, this one will also be getting a trunk type hatch. I will not be doing that part though. Ricky will be handleing all that stuff after he gets the truck back. pics...
Collapsed Accord
+1y
is it done yet fuckkkkk....... come on u lazy fucks get to work ..... what is this the like first ride u guys did this year or something cant wait to see this one you guys are fuckin killin it right now great job
is it done yet fuckkkkk....... come on u lazy fucks get to work ..... what is this the like first ride u guys did this year or something cant wait to see this one you guys are fuckin killin it right now great job
LAID TL
+1y
i cant wait neither Josh gonna be sick dirvin this bad boy from Albuquerque to Parker for WCN !!!!
ST LayDBurBan
+1y
ooooh boy this gonna be dope as fuck!!! good choice on our suspension builder fusion!!! you guys make this look super easy!!!!