84 suburban

I'm trading a guy my sfbd 99 ranger on 22's for this 84 burbon I want to lay it on the rockers and was wondering what all needs to be done do I have to z the  front end and if so how much will probably just trad drop it with a notch in the back I want to run 22's on it and shave all the handles. also I seen a blue one on here and he as a drop gate instead of the barn doors which model can I swipe these  off of and last but not least were can I get a sliding rag top for it I want it to go from the front all the way to the back    

Im laying frame... I didnt have the frame Z'd, I got a suicide doors Drop Member...  2.5" drop spindles, ... Somehow got a mustang rack and steering linkage (I didnt do the work, AfterHoursFabrication.com did) to clear arms, Had the Heater box refrabricated, rear, i have a 4 link with a track bar... My truck was built for 22's. 

Oh yea, im not sure about which years have drop down rear doors, but mine is a 79, and also had a 76 with it.

My arms had to be cut, adjusted and welded back together... It was either this or the aftermarket ones for $1000

thanks very much for the pics for the arms did you just have to adjust them for the ball joint angle and does your notch interfier with the backseat at all

thats a nice start man, keep us updated!

downhere do you have anymoer pics of the rack setup on the front would def like to switch over to that if possible or do yo u know if dave has any more pics of it

Z it 3" and it'll lay on 24's with stock arms.   Check out www.c10forum.com.  All the info you need on there. 

my arms looked like the ones DOWNHERE has but im redueing them but they worked fine and im laying 24's.  it would be hard to do the sliding roof because the roof line moves up about 2 feet back from the windshield.  you would have to redue the whole roof to make it look right.  mine is an 84 also and it has the truck style tailgate and window. 

streetbeatcustoms.com for the sliding ragtop. from the front all the way back? gotta have deep pockets son. everything else seems to be covered. glad i could help somehow!