threads
Page 1 of 1
Toyota Trucks \  ???? abought useing stock fuel pump on fuel cell

???? abought useing stock fuel pump on fuel cell

Toyota Trucks Make Specific
views 2811
replies 6
following 7
 
layin22ʹs   +1y
yeah guys what are you useing to keep your stock fuel pumps with a fuel cell..its an 87 yota if that matters.
insaneautoconcepts   +1y
finalfab.com 
cuddcountry   +1y


any other information on this mod??

biggin   +1y


i order a my 12 gal fuel cell from summit. only thing i had to do to use the stock fuel pump was cut the hole bigger in the fuel cell with an air saw.

mindlissmetalfab   +1y


All you need to do is weld a flange with the same bolt pattern to the cell you want to use, be it custom made or from summit, etc. As long as the new cell is deep enough. This is one I designed and had fabbed for a customers 92.   
post photo
post photo
post photo
mindlissmetalfab   +1y


You can also do this on trucks with pumps that usually lock in with snap rings etc. In these cases you make a 2 piece adapter that just clamps the flange of the pump down: Ranger: (this one was bought, first one I used and started making them afterwards..this one had to be tall to make up for the tank depth and I dont really like the look so now I just make cells to match)  2nd Ranger, custom cell and adapter: S10:  
post photo
post photo
post photo
Texmextukin   +1y
Edited: 10/22/2009 3:14:40 PM by Texmextukin

I cut the stock locking ring part out of the tank and welded it to a 2" spacer

post photo
post photo
Page 1 of 1