tacomaon24s
+1y
this is where i am so far on my ranger the front suspension is completely done will have some more pics tommorrow. the rear is almost all done i am going to try and have it completely done including interior and the exterior powder coating by art of noize in febuary. the front wheels are 22x8 with a 34 offset and a 235/30x22 tire. the rear is a 22 x 9.5 in a 13 offset it is a 245/30x22. tommorrow i will post some pics of the front suspension and the truck lifted up it can not stay up on its own yet the hydraulic pump is not hooked up yet. but i do have the cylinders done in the front and use air on it with nitrogen bottle. the stock hood shuts with out cutting it out and the motor is about 2 inches from the hood so i could do a channel later and go lower if i want. the cv axles are getting built in town and should get the full travel of the rear suspension which is about 15 or 16 inches. the front gets about 15 - 20 inches not 100% on it for sure yet. the fuel cell i built also its made of 312 stainless steel and fully tig welded. i am going to be using 1/2 id stainless steel hardline for fuel line and also for my hydraulic line. i will post more pics and the rest later on when i get some more done on it opefully tommorrow i will have some more prgress. thanks for looking at it and for your time.