Page 98 of 132
Mini Truckin General \ Michigan Metal Works ---- Updates : Please Read.Michigan Metal Works ---- Updates : Please Read.
views 56663
replies 1319
following 232
artsar
+1y
Will you be at Dropt N Destroyed? I'd like to get one if you will be there. If not maybe I will see if any other Canadians want one and do a bulk order. I need new clothes!
jeebus @ mmw
+1y
I will be at DND, but not sure if i will have the shirts in stock by then. Its a possibility. If you put together a bulk order, i can get them to canada no problem.
jeebus @ mmw
+1y
Ok, just a few installed pics from a customer.
Square body suburban, laying on 24x10, with MMW Jeebus Joint Arms.
Square body suburban, laying on 24x10, with MMW Jeebus Joint Arms.
tuckinlugs06
+1y
hey taylor could you get some pics of how they mounted that york...like more the bracket
jeebus @ mmw
+1y
I can try.
Shirts are on the website!
http://michiganmetalworks.com/store/index.php?route=product/product&path=71_74&product_id=94
Shirts are on the website!
http://michiganmetalworks.com/store/index.php?route=product/product&path=71_74&product_id=94
jeebus @ mmw
+1y
Been working on A LOT in the shop lately, and some big changes are coming soon as well, we will be offering some new services that were very happy about, and going to do some expanding.
Regardless here are a hand full of things that we've put out this past couple weeks for customers.
these are the newly designed 02-05 ram upper and lower arm set. The lowers are built to accept the stock shock in a very clean and simple installation location. The whole setup will lay out on a 26 or 24s with stock spindles! This specific customer is going to lay on a 24 with stock spindles.
Some new toyota control arms, in jeebus joint version. made for a customer trying to lay out on 22s
And lastly, my newly designed 07+ Chevy / GMC front end kit. This customer wanted a kit to lay out on 24s, but will stuff 26s as well, and still retain driveability. Raised UCA mounts, Jeebus joint uppers, bearing lowers flipped on the spindle, upper bag mounts and shock mounts all went with the kit to him.
Regardless here are a hand full of things that we've put out this past couple weeks for customers.
these are the newly designed 02-05 ram upper and lower arm set. The lowers are built to accept the stock shock in a very clean and simple installation location. The whole setup will lay out on a 26 or 24s with stock spindles! This specific customer is going to lay on a 24 with stock spindles.
Some new toyota control arms, in jeebus joint version. made for a customer trying to lay out on 22s
And lastly, my newly designed 07+ Chevy / GMC front end kit. This customer wanted a kit to lay out on 24s, but will stuff 26s as well, and still retain driveability. Raised UCA mounts, Jeebus joint uppers, bearing lowers flipped on the spindle, upper bag mounts and shock mounts all went with the kit to him.