?????'S TO LAY FRAME ON A 94 RADO ON 24'S

I got a 94 silverado here at the house, thats about to go down. I was just wanting to know if there's any known issues to lay frame flat on 24's. Thats the main goal, with this vehicle.Aside from moving the wiring harness, i don't know if you have to tub the firewall or not. its very close.As far as the front arms go. You have to have tubular arms upper and lower dont you. I'm already lookin for a set of those as well as spindles. No body drop in the future for this truck so, we wanna achieve the most lift, to clear those things.thanks for sny insight or help. I f any of you guys are sellin arms. lmk what a set is shipped to 31602 in ga. Thanks

yes u have to tub the firewall, and u will need spindles and tubular uppers and lowers.

Only thing I can think of that wasnt already mentioned is notching the tie rods

you can use tubular control arms but you dont have to the stock ones with drop spindles work just as good if you wanna save a lil cash flow you just have to dehump the lower control arm so it doesnt hit the frame when layed out i ran 24s on my 96 silverado it was bodydroped and layed out fine

thanks. im tryin to get up a good quote and get myy ducks in a row. I want to make this a quick turnaround. thanks again

I just IM'd you about a set of lowers I have for sale if your interested.  Email me back at drupru22@aol.com

also while were here. Is there anybody making a wishbone or 2 link that lays the rear on 24's? All ive seen is to lay 22's . Just wondering

yeah done several of these i make a 2 link that bolts in with a panhard that bolts in also have the uppers and lowers for this truck as well that will lay a 24 with no cutting of the frame and such also gets pretty good lift.

how much does a set of them lowers cost?  another question.. to just lay frame with 24's in the rear will i have to narrow the rear end or could i find a set with a high enough offset that they will fit under there nicely with out narrowing the rear end.. truck is bagged on 22's and has a KP 6 link in the rear. any help on this is greatly appreciated

yeah looking for uppers and lowers too!