tucking rims

hey guys, ive been researching this question i have, which is can i tuck a 22x8.5 with a 40mm offset without narrowing the rear axle? from what ive found this question is asked about 20x8.5s with 40+ offset. so would the 2 inches in height be a problem? i already have a narrowed axle, that is messed up and leaks, and i am wanting to put my factory axle back under it. as far as my front suspension, i have djm 2" lower control arms and stock uppers and i tuck my 20x8.5 with 19mm offset. so i feel the 22s will tuck in the front, with modifying the uppers to keep them from hitting the exhaust manifolds

what kind of truck are we working with?

my fault man, '99 dodge dakota

I made some narrowed control arms for an 01 dakota, to tuck 22s with a +25 offset.  I narrowed each side 1" to help with turning. From what i remember, he was running a stock rear end, and had a 22x8 with +38 offset, and had a stock rear end, but was in the process of narrowing it because of how badly it rubbed the bed sides. He was also running a super small tire.    Taylor