Page 1 of 2
Air Ride Suspensions \ tear in slam bagtear in slam bag
views 790
replies 10
following 10
92yota
+1y
I've had these about a year. Just noticed the tear the other day. From the looks of it, the tear is in the crease of the bag as you can see in the second picture. Therefore, that part of the bag isn't rubbing the mount. Just wanted a second opinion on whether this is a bag failure or bad install. I think most of our bags touch the face of the mounting plate like this. If its a bag failure, do I call Slam directly or go through the place I bought the bags? Is this something they'll replace for free?
simple-pleasurez
+1y
mine are cracking bad and i am afraid they are about to tear. i think they dont cover it. i would love mine replaced. even if i have to pay a little to get them replaced it would be better....
90yota
+1y
Ive had them on my truck with no issues but a buddy of mine had this same problem a while ago and Slam Specialties totally took care of him....replaced the bags and were really easy to deal with...from what I've seen and heard, they're very stand up...get in touch with them
Ive had them on my truck with no issues but a buddy of mine had this same problem a while ago and Slam Specialties totally took care of him....replaced the bags and were really easy to deal with...from what I've seen and heard, they're very stand up...get in touch with them
tharealjoedirt
+1y
there not gonna replace that one.look at the rub mark on it to..thats a bad install...look how the bag rubs that corner...your bag shouldnt have any rub marks on it at all...thats def not the bad all comsumer right there
there not gonna replace that one.look at the rub mark on it to..thats a bad install...look how the bag rubs that corner...your bag shouldnt have any rub marks on it at all...thats def not the bad all comsumer right there
Rob Clayhill
+1y
from what it looks like to me, is that the sharp edge on the upper bag mount may have started the cut and then it just ran along the seam, stretching it throughout the suspension cycle, stretching the bag at lift as seen in the 3rd picture.it's always hard to be for sure in a picture though, get ahold of them and see what they say. what can it hurt? if you do end up replacing it, you might want to clean those edges up a bit anyway.
from what it looks like to me, is that the sharp edge on the upper bag mount may have started the cut and then it just ran along the seam, stretching it throughout the suspension cycle, stretching the bag at lift as seen in the 3rd picture.it's always hard to be for sure in a picture though, get ahold of them and see what they say. what can it hurt? if you do end up replacing it, you might want to clean those edges up a bit anyway.
92yota
+1y
Edited: 6/28/2010 9:23:41 PM by 92yota
---------------------------------------------Originally posted by tharealjoedirtthere not gonna replace that one.look at the rub mark on it to..thats a bad install...look how the bag rubs that corner...your bag shouldnt have any rub marks on it at all...thats def not the bad all comsumer right there--------------------------------------------- On the first picture, if you look about 1" or so below and to the left of the tear you will see the line where the bag rubs the mount. The tear is in the crease. Now im not sure if I should just bolt a new one in the same place or not, because about 95% of upper bag brackets are going to touch the bag when its collapsed like mine do. Unless I have a circular bag bracket that is the exact size of the upper bag plate and is connected directly on top with some tubing or something....
---------------------------------------------Originally posted by tharealjoedirtthere not gonna replace that one.look at the rub mark on it to..thats a bad install...look how the bag rubs that corner...your bag shouldnt have any rub marks on it at all...thats def not the bad all comsumer right there--------------------------------------------- On the first picture, if you look about 1" or so below and to the left of the tear you will see the line where the bag rubs the mount. The tear is in the crease. Now im not sure if I should just bolt a new one in the same place or not, because about 95% of upper bag brackets are going to touch the bag when its collapsed like mine do. Unless I have a circular bag bracket that is the exact size of the upper bag plate and is connected directly on top with some tubing or something....
BaggedIndy
+1y
Just had some Slam bags replaced that were a couple years old because of the cracking around the plates, no questions asked. Give them a call or send an e-mail through their website warranty page to see if they can cover it. Great bunch of people taking care of their name. Thanks to Nick,Tim and Diane for taking care of this.
Just had some Slam bags replaced that were a couple years old because of the cracking around the plates, no questions asked. Give them a call or send an e-mail through their website warranty page to see if they can cover it. Great bunch of people taking care of their name. Thanks to Nick,Tim and Diane for taking care of this.
