Tundra Build 2nd Gen

There are a few other threads on here about the trek to make a kit for the 07-10 Tundra, so I won't repost all of that. Billy aka FX Custumz along with Joe & Aaron made this happen! I am using AirBagIt's front setup, and their custom made gas tank. Billy fabricated the whole rear end. Moser shortened the axles.
Full shot below with bed back on..Tanks/Compressors still need to be mounted in bed etc, but the hard part is over!! Per my installer aka Billy aka FX Custumz, this was the hardest truck that he has ever bagged, and AirBagIt will echo much of same thing I am sure! More pics will come in the following weeks.Still might be able to get another 1/2" to 1" out of the front by cutting the cross member out, but will eventually do a "body drop" on the main floor as the bed has already been "body dropped". 
 
Next up is paint by BSKustoms in Hampton GA.
 
 

 
 
http://s102.photobucket.com/albums/m109/lowriderman3/?action=view&current=IMG00133-20100606-1543.jpg
 
http://s102.photobucket.com/albums/m109/lowriderman3/?action=view&current=28906_1300854526369_1380624718_3082.jpg
 
http://s102.photobucket.com/albums/m109/lowriderman3/?action=view&current=28906_1300850886278_1380624718_3082.jpg 
 
Bed Floor Raised 6 Inches
http://s102.photobucket.com/albums/m109/lowriderman3/?action=view&current=28205_1325914392850_1380624718_3088.jpg

Edited: 7/4/2010 8:15:22 AM by lowriderman3

**Update** Took a 1st place trophy at Scrapin' The Coast 2010.     

what was the 1st place trophy for?

^^Toyota Category.