threads
Page 1 of 1
Chevy/GMC Trucks \  colorado/canyon brake question

colorado/canyon brake question

Chevy/GMC Trucks Make Specific
views 499
replies 4
following 3
 
pmiller   +1y
In order to change the rotors on these trucks. Does the hub need to be pressed out of the spindle assy?
teckn9ne   +1y
I don't think so, should be four bolts and it may take a little bit of wiggling but it should come right out
pmiller   +1y
Thanks. I'll be checking this out tomorrow. The bolts were taken out already. I didn't really get a chance to mess with it. The dude working on it said he couldn't get it apart. I figured I'd ask someone before I messed with it.
BabyYouWish   +1y
I apologize I can't answer your question, but check on www.355Nation.net for a positive answer. Its a site dedicated to Colorados/Canyons and there is a ton of useful information on there about those trucks!

- Matt
pmiller   +1y
Thanks for the info. I was able to get them off. The truck was originally from Michigan, so there was a little rust build up on the hub and spindle. It just needed a little persuasion to come apart.
Page 1 of 1